D a t a S h e e t
11. Absolute Maximum Ratings
Parameter
Rating
–65°C to +150°C
–65°C to +125°C
–0.5 V to +4.0 V
–0.5 V to +12.5 V
–0.5 V to VCC+0.5 V
200 mA
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
VCC (Note 1)
Voltage with Respect to Ground
A9, OE#, ACC and RESET# (Note 2)
All other pins (Note 1)
(Note 3)
Output Short Circuit Current
Notes
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/Os may overshoot V to –2.0 V for periods of up to
SS
20 ns. See Figure 11.1. Maximum DC voltage on input or I/Os is V + 0.5 V. During voltage transitions, input or I/O pins may overshoot
CC
to V + 2.0 V for periods up to 20 ns. See Figure 11.2.
CC
2. Minimum DC input voltage on pins A9, OE#, ACC, and RESET# is –0.5 V. During voltage transitions, A9, OE#, ACC, and RESET# may
overshoot V to –2.0 V for periods of up to 20 ns. See Figure 11.1. Maximum DC input voltage on pin A9, OE#, ACC, and RESET# is
SS
+12.5 V which may overshoot to +14.0V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
Figure 11.1 Maximum Negative Overshoot Waveform
20 ns
20 ns
+0.8 V
–0.5 V
–2.0 V
20 ns
Figure 11.2 Maximum Positive Overshoot Waveform
20 ns
V
CC
+2.0 V
V
CC
+0.5 V
2.0 V
20 ns
20 ns
12. Operating Ranges
Parameter
Ambient Temperature (T ), Industrial (I) Devices
Range
–40°C to +85°C
+2.7 V to +3.6 V
+1.65 to +3.6 V
A
V
V
for full voltage range
CC
IO
Supply Voltages
Notes
1. Operating ranges define those limits between which the functionality of the device is guaranteed.
2. input voltage always must be lower than V input voltage.
V
IO
CC
November 16, 2007 S29GL-N_01_09
S29GL-N MirrorBit® Flash Family
61