MBM29DL16XTE/BE70/90
■ ABSOLUTE MAXIMUM RATINGS
Rating
Parameter
Symbol
Unit
Min
–55
–40
Max
+125
+85
Storage Temperature
Tstg
TA
°C
°C
Ambient Temperature with Power Applied
Voltage with Respect to Ground All Pins except
A9, OE, RESET *1, *2
VIN, VOUT
–0.5
VCC+0.5
V
Power Supply Voltage *1
A9, OE, and RESET *1, *3
WP/ACC *1, *4
VCC
VIN
–0.5
–0.5
–0.5
+4.0
+13.0
+10.5
V
V
V
VACC
*1 : Voltage is defined on the basis of VSS = GND = 0 V.
*2 : Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may
undershoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCC +0.5 V.
During voltage transitions, input or I/O pins may overshoot to VCC +2.0 V for periods of up to 20 ns.
*3 : Minimum DC input voltage on A9, OE and RESET pins is –0.5 V. During voltage transitions, A9, OE
and RESET pins may undershoot VSS to –2.0 V for periods of up to 20 ns. Voltage difference between
input and supply voltage (VIN–VCC) does not exceed 9.0 V. Maximum DC input voltage on A9, OE and
RESET pins is +13.0 V which may overshoot to +14.0 V for periods of up to 20 ns.
*4 : Minimum DC input voltage on WP/ACC pin is –0.5 V. During voltage transitions, WP/ACC pin may
undershoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC input voltage on WP/ACC pin
is +10.5 V which may overshoot to +12.0 V for periods of up to 20 ns when Vcc is applied.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Value
Parameter
Symbol
Conditions
Unit
Min
–40
+2.7
Max
+85
MBM29DL16XTE/BE70/90
MBM29DL16XTE/BE70/90
Ambient Temperature
Power Supply Voltage*
TA
°C
V
VCC
+3.6
* : Voltage is defined on the basis of VSS = GND = 0 V.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
43