D A T A S H E E T
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Plastic Packages . . . . . . . . . . . . . . . –65°C to +150°C
20 ns
20 ns
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . –65°C to +125°C
+0.8 V
Voltage with Respect to Ground
–0.5 V
–2.0 V
V
CC (Note 1). . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
A9, OE#, and RESET# (Note 2). .–0.5 V to +13.0 V
All other pins (Note 1). . . . . . –0.5 V to +VCC+0.5 V
Output Short Circuit Current (Note 3) . . . . . . 200 mA
20 ns
Figure 9. Maximum Negative Overshoot
Waveform
Notes:
1. Minimum DC voltage on input and I/O pins is –0.5 V.
During voltage transitions, input and I/O pins may
overshoot V to –2.0 V for periods of up to 20 ns. See
SS
Figure 9. Maximum DC voltage on input and I/O pins is
V
+ 0.5 V. During voltage transitions input or I/O pins
CC
may overshoot to V + 2.0 V for periods up to 20 ns. See
Figure 10.
CC
20 ns
V
CC
2. Minimum DC input voltage on pins A9, OE#, and RESET#
is –0.5 V. During voltage transitions, A9, OE#, and
+2.0 V
V
RESET# may overshoot V to –2.0 V for periods of up to
CC
SS
+0.5 V
20 ns. See Figure 9. Maximum DC input voltage on pin A9
and OE# is +13.0 V which may overshoot to 14.0 V for
periods up to 20 ns.
2.0 V
20 ns
20 ns
3. No more than one output may be shorted to ground at a
time. Duration of the short circuit should not be greater
than one second.
Figure 10. Maximum Positive Overshoot
Waveform
4. Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only; functional operation of the de-
vice at these or any other conditions above those indicated
in the operational sections of this data sheet is not implied.
Exposure of the device to absolute maximum rating condi-
tions for extended periods may affect device reliability.
OPERATING RANGES
Industrial (I) Devices
Ambient Temperature (TA) . . . . . . . . . –40°C to +85°C
Extended (E) Devices
Ambient Temperature (TA) . . . . . . . . –40°C to +125°C
VCC Supply Voltages
VCC for regulated voltage range. . . . . . .3.0 V to 3.6 V
Operating ranges define those limits between which the func-
tionality of the device is guaranteed.
28
Am29BL162C
July 8, 2005