CXA2066S
Notes on Operation
1. Set the output for ROUT, GOUT, and BOUT for reception at high impedance.
2. Make the wiring from ROUT, GOUT, and BOUT to the power amplifier as short as possible.
3. Connect the VCC and VCC2 decoupling capacitor so that the ceramic capacitor and electrolytic capacitor are
connected in parallel and the distance from the IC is as short as possible.
4. Connect the clamp capacitor for RIN, GIN, BIN, S/H-R, S/H-G, S/H-B so that the distance from the IC is as
short as possible.
5. Set the output to OFF when the VDET output is not used (Set I2C BUS VDETOFF "1").
– 20 –