欢迎访问ic37.com |
会员登录 免费注册
发布采购

LAN9210 参数 Datasheet PDF下载

LAN9210图片预览
型号: LAN9210
PDF下载: 下载PDF文件 查看货源
内容描述: 外形小巧单芯片以太网控制器与HP Auto-MDIX的 [Small Form Factor Single- Chip Ethernet Controller with HP Auto-MDIX]
分类和应用: 控制器以太网
文件页数/大小: 458 页 / 4618 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号LAN9210的Datasheet PDF文件第336页浏览型号LAN9210的Datasheet PDF文件第337页浏览型号LAN9210的Datasheet PDF文件第338页浏览型号LAN9210的Datasheet PDF文件第339页浏览型号LAN9210的Datasheet PDF文件第341页浏览型号LAN9210的Datasheet PDF文件第342页浏览型号LAN9210的Datasheet PDF文件第343页浏览型号LAN9210的Datasheet PDF文件第344页  
High Performance Two Port 10/100 Managed Ethernet Switch with 32-Bit Non-PCI CPU Interface  
Datasheet  
14.5.2.18 Port x MAC Receive Alignment Error Count Register (MAC_RX_ALIGN_CNT_x)  
Register #:  
Port0: 041Fh  
Port1: 081Fh  
Port2: 0C1Fh  
Size:  
32 bits  
This register provides a counter of received packets with 64 bytes to the maximum allowable, and a  
FCS error. The counter is cleared upon being read.  
BITS  
DESCRIPTION  
TYPE  
DEFAULT  
31:0  
RX Alignment  
RC  
00000000h  
Count of packets that have between 64 bytes and the maximum allowable  
number of bytes and are not byte aligned and have a bad FCS. The max  
number of bytes is 1518 for untagged packets and 1522 for tagged packets.  
If Jumbo2K (bit 3) is set in the Port x MAC Receive Configuration Register  
(MAC_RX_CFG_x), the max number of bytes is 2048.  
Note:  
This counter will stop at its maximum value of FFFF_FFFFh.  
Minimum rollover time at 100Mbps is approximately 481 hours.  
Note: For this counter, a packet with the maximum number of bytes that is not an integral number of  
bytes (e.g. a 1518 1/2 byte packet) and a FCS error is considered an alignment error and is  
counted.  
Revision 1.2 (04-08-08)  
340  
SMSC LAN9312  
DATASHEET  
 复制成功!