High Performance Two Port 10/100 Managed Ethernet Switch with 32-Bit Non-PCI CPU Interface
Datasheet
BITS
DESCRIPTION
TYPE
DEFAULT
4
IRQ Polarity (IRQ_POL)
R/W
NASR
Note 14.1
0b
When cleared, this bit enables the IRQ line to function as an active low
output. When set, the IRQ output is active high. When the IRQ is configured
as an open-drain output (via the IRQ_TYPE bit), this bit is ignored, and the
interrupt is always active low.
0: IRQ active low output
1: IRQ active high output
3:1
0
RESERVED
RO
-
IRQ Buffer Type (IRQ_TYPE)
R/W
NASR
Note 14.1
0b
When this bit is cleared, the IRQ pin functions as an open-drain output for
use in a wired-or interrupt configuration. When set, the IRQ is a push-pull
driver.
Note:
When configured as an open-drain output, the IRQ_POL bit is
ignored and the interrupt output is always active low.
0: IRQ pin open-drain output
1: IRQ pin push-pull driver
Note 14.1 Register bits designated as NASR are not reset when either the SRST bit in the Hardware
Configuration Register (HW_CFG) register or the DIGITAL_RST bit in the Reset Control
Register (RESET_CTL) is set.
SMSC LAN9312
173
Revision 1.2 (04-08-08)
DATASHEET
SMSC [ SMSC CORPORATION ]
