10/100 Non-PCI Ethernet Single Chip MAC + PHY
Datasheet
0.1
Datasheet Revision History
Table 0.1 LAN91C111 Datasheet Revision History
REVISION
LEVEL AND
DATE
Rev. 1.8
(07-13-05)
NAME
K. Lawrence
SECTION/FIGURE/ENTRY
-
and
and
Ordering Information
-
and
Features
3
CORRECTION
Fixed t4 MIN/MAX values. Clarified CRC
in RX packet description.
Rev. 1.7
(11-16-04)
Rev. 1.6
(05-18-04)
Lead-free added.
Modified t1 and t4.
Rev. 1.6
(05-18-04)
Modified description of restoring to normal
power mode.
Rev. 1.6
(05-18-04)
Rev. 1.5
(02-20-04)
Rev. 1.5
(02-20-04)
Rev. 1.4
(12-12-03)
Rev. 1.3
(07-29-03)
Rev. 1.3
(07-18-03)
Rev. 1.3
(07-18-03)
Rev. 1.3
(07-18-03)
Rev. 1.2
(09-17-02)
Rev. 1.0
(07-01-02)
Rev. 1.0
(07-01-02)
Rev. 1.0
(07-01-02)
SMSC LAN91C111-REV B
Modified description of PHY power down
mode.
Modified description of INTR0 pin active
high.
Modified Reg.18 LNKFAIL bit to “0” by
default.
Removed “user programmable” under
LED Output features.
Modified LAN91C111 Temp 0°C to +85°C.
Modified description of the BROADCAST
bit in Receive Frame Status.
Modified description of the STP_SQET bit
in TCR Register.
Modified description of SQET bit in EPH
Status Register.
Added chart showing decoding of I/O
Base Address 300h.
Add Buffer Type for nLEDA and nLEDB,
Add description of LCLK.
Modified Auto-Negotiation Enable
Description.
Add Reset Description.
DATASHEET
Revision 1.8 (07-13-05)