OPERATIONAL DESCRIPTION
MAXIMUM GUARANTEED RATINGS*
Operating Temperature Range.....................................................................................................0oC to +70oC
Storage Temperature Range..................................................................................................... -55o to +150oC
Lead Temperature Range (soldering, 10 seconds)...............................................................................+325oC
Positive Voltage on any pin, with respect to Ground ......................................................................... VCC+0.3V
Negative Voltage on any pin, with respect to Ground............................................................................... -0.3V
Maximum VCC.............................................................................................................................................. +7V
*Stresses above those listed above could cause permanent damage to the device. This is a stress rating only and
functional operation of the device at any other condition above those indicated in the operation sections of this
specification is not implied.
Note: When powering this device from laboratory or system power supplies, it is important that the Absolute Maximum
Ratings not be exceeded or device failure can result. Some power supplies exhibit voltage spikes on their outputs when
the AC power is switched on or off. In addition, voltage transients on the AC power line may appear on the DC output. If
this possibility exists, it is suggested that a clamp circuit be used.
DC ELECTRICAL CHARACTERISTICS (TA = 0°C - 70°C, Vcc = 5 V ± 10%)
PARAMETER
SYMBOL MIN
TYP
MAX UNITS
COMMENTS
I Type Input Buffer
Low Input Level
VILI
0.8
0.8
V
V
TTL Levels
High Input Level
VIHI
2.0
2.2
IS Type Input Buffer
Low Input Level
High Input Level
VILIS
VIHIS
VHYS
V
V
Schmitt Trigger
Schmitt Trigger
Schmitt Trigger Hysteresis
250
mV
ICLK Input Buffer
Low Input Level
High Input Level
VILCK
VIHCK
0.4
V
V
3.0
136