ST7735
10.1.25 TEON (35h): Tearing Effect Line ON
35H
TEON (Tearing Effect Line ON)
Inst / Para
TEON
D/CX WRX RDX
D17-8
D7
0
D6
0
D5
1
D4
1
D3
0
D2
1
D1
0
D0
HEX
0
1
↑
↑
1
1
-
-
1
(35h)
Parameter
0
0
0
0
0
0
0
TELOM
-This command is used to turn ON the Tearing Effect output signal from the TE signal line.
-This output is not affected by changing MADCTL bit ML.
-The Tearing Effect Line On has one parameter, which describes the mode of the Tearing Effect Output Line:
-When TELOM =’0’: The Tearing Effect output line consists of V-Blanking information only
Tvdl
Tvdh
Vertical time scale
Description
-When TELOM =’1’: The Tearing Effect output Line consists of both V-Blanking and H-Blanking information
Tvdl Tvdh
Vertical time scale
Note: During Sleep In Mode with Tearing Effect Line On, Tearing Effect Output pin will be active Low.
Status
Default Value
Power On Sequence
S/W Reset
Tearing effect off & TELOM=0
Tearing effect off & TELOM=0
Tearing effect off & TELOM=0
Default
H/W Reset
Legend
Command
TEꢁLineꢁOutput
OFF
Parameter
Display
TEON
Flow Chart
TELOM
Action
Mode
TEꢁLineꢁOutput
ON
Sequential
transter
V1.7
108
2009-12-04
SITRONIX [ SITRONIX TECHNOLOGY CO., LTD. ]
