Preliminary
GM5BW94320A
● Pick and Place Recommendations
1. Please see Fig. 19 for general pick and place nozzle recomendations for installing this part.
Fig. 19 Recommended Nozzle
Avoid
Avoid
GM5BW94320A-21
2. Picking errors can occur based on the machine’s setup, so Sharp recommends verification with the machine in
actual use.
3. Do not allow the pick and place machine to contact the sealing resin in this part. If mechanical stress is placed
on the sealing resin, such forces can cause the resin to fail, or cause bonding wires within the part to break.
■ Presence of ODCs
This product shall not contain the following materials, and they are not used in the production process for this
product:
• Regulated substances: CFCs, Halon, Carbon tetrachloride, and 1,1,1-Trichloroethane (Methylchloroform).
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
• Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl
ethers (PBDE).
Sheet No.: DG-067010A
14