Preliminary
GM5BW94320A
● Soldering Instructions
1. When soldering with reflow methods, Sharp recommends following the soldering profile in Fig. 17.
2. Do not subject the package to excessive mechanical force during soldering as it may cause deformation or
defects in plated connections. Internal connections may be severed due to mechanical force placed on the pack-
age due to the PCB flexing during the soldering process.
3. When using a second reflow, the second process should be carried out as soon as possible after the first.
4. Electrodes on this part are silver-plated. If the part is exposed to a corrosive environment, the plating may be
damaged, thereby affecting solderability.
5. The Reflow Profile shown in Fig. 17 should be considered as a set of maximum parameters. Since this part uses
the leads for heatsinking, the peak temperature should be kept as cool as possible and the cooldown period
lengthened as much as possible. Thermal conduction into the LED will be affected by the performance of the
reflow process, so verification of the reflow process is recommended. These parts may be used in a nitrogen
reflow process.
Fig. 17 Temperature Profile
260 MAX.
1 - 4°C/s
1 - 2.5°C/s
220
150 - 200
5 s MAX.
60 - 120 s
60 s MAX.
25
Time (second)
GM5BW94320A-19
Sheet No.: DG-067010A
12