DS2154
TCR1: TRANSMIT CONTROL REGISTER 1 (Address = 12 Hex)
(MSB)
(LSB)
TSIO
ODF
TFPT
T16S
TUA1
TSiS
TSA1
TSM
SYMBOL
POSITION
NAME AND DESCRIPTION
ODF
TCR1.7
Output Data Format.
0 = bipolar data at TPOSO and TNEGO
1 = NRZ data at TPOSO; TNEGO = 0
TFPT
TCR1.6
Transmit Time Slot 0 Pass Through.
0 = FAS bits/Sa bits/Remote Alarm sourced internally from the
TAF and TNAF registers
1 = FAS bits/Sa bits/Remote Alarm sourced from TSER
T16S
TUA1
TSiS
TCR1.5
TCR1.4
TCR1.3
Transmit Time Slot 16 Data Select.
0 = sample time slot 16 at TSER pin
1 = source time slot 16 from TS0 to TS15 registers
Transmit Unframed All 1s.
0 = transmit data normally
1 = transmit an unframed all 1’s code at TPOSO and TNEGO
Transmit International Bit Select.
0 = sample Si bits at TSER pin
1 = source Si bits from TAF and TNAF registers (in this mode,
TCR1.6 must be set to 0)
TSA1
TSM
TCR1.2
TCR1.1
Transmit Signaling All 1s.
0 = normal operation
1 = force time slot 16 in every frame to all 1s
TSYNC Mode Select.
0 = frame mode (see the timing in Section 14)
1 = CAS and CRC4 multiframe mode (see the timing in Section
14)
TSIO
TCR1.0
TSYNC I/O Select.
0 = TSYNC is an input
1 = TSYNC is an output
Note: See Figure 14-11 for more details about how the Transmit Control Registers affect the operation of the DS2154.
23 of 87
ROCHESTER [ Rochester Electronics ]
