RT7297C
The maximum power dissipation depends on the operating
ambient temperature for fixed TJ(MAX) and thermal
resistance, θJA. The derating curve in Figure 8 of derating
curves allows the designer to see the effect of rising
ambient temperature on the maximum power dissipation
allowed.
(a) Copper Area = (2.3 x 2.3) mm2,θJA = 75°C/W
2.2
Four-Layer PCB
2.0
1.8
Copper Area
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
2
70mm
2
50mm
30mm
2
2
10mm
Min.Layout
(b) Copper Area = 10mm2,θJA = 64°C/W
0
25
50
75
100
125
Ambient Temperature (°C)
Figure 8. Derating Curve of Maximum PowerDissipation
(c) Copper Area = 30mm2 ,θJA = 54°C/W
(d) Copper Area = 50mm2 ,θJA = 51°C/W
(e) Copper Area = 70mm2 ,θJA = 49°C/W
Figure 7. Thermal Resistance vs. CopperArea Layout
Design
Copyright 2014 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS7297C-02 April 2014
www.richtek.com
13
RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]
