RT3602AP
Pin No
14, 15, 19, 20, 21 NC
16, 17
18
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Pin Name
No internal connection.
Pin Function
PWM[2:1]_MAIN PWM outputs for main rail VR of Channel 1 and 2.
DRVEN_SET
PWM_AUXI
TSEN_AUXI
FB_AUXI
RGND_AUXI
COMP_AUXI
VSEN_AUXI
ISENN_AUXI
ISENP_AUXI
IMON_AUXI
VR_HOT
VDIO
ALERT
VCLK
DRVEN
PWM_SA
EN
VR_READY
IMON_SA
ISENP_SA
ISENN_SA
VREF06/PSET
COMP_SA
RGND_SA
FB_SA
Set DRVEN output function at PS4. Set to 5V DRVEN is floating, and set to
GND DRVEN is low at PS4.
PWM outputs for auxiliary rail VR.
Thermal sense input for AUXI rail VR.
Negative input of the error amplifier. This pin is for auxiliary rail VR output
voltage feedback to controller.
Return ground for auxiliary rail VR. This pin is the negative node of the
differential remote voltage sensing.
Auxiliary rail VR compensation. This pin is error amplifier output pin.
Auxiliary VR voltage sense input. This pin is connected to the terminal of
Main VR output voltage.
Negative current sense input of single-phase auxiliary Rail.
Positive current sense input of single-phase auxiliary Rail.
Auxiliary rail VR current monitor output. This pin outputs a voltage
proportional to the output current.
Thermal monitor output. This pin is active low.
VR and CPU data transmission interface.
SVID alert. (Active low)
Synchronous clock from the CPU.
External driver enable control. Connecting to driver enable pin.
PWM outputs for VCCSA VR.
VR enable control input.
VR ready indicator.
VCCSA rail VR current monitor output. This pin outputs a voltage
proportional to the output current.
Positive current sense input of single-phase VCCSA rail VR.
Negative current sense input of single-phase VCCSA rail VR.
Fixed 0.6V output reference voltage. This voltage is used to offset the output
voltage of IMON pin. Between this pin and GND must be placed a exact
0.47F decoupling capacitor and 3.9 resistor.
VCCSA rail VR compensation. This pin is error amplifier output pin.
Return ground for VCCSA rail VR. This pin is the negative node of the
differential remote voltage sensing.
Negative input of the error amplifier. This pin is for VCCSA rail VR output
voltage feedback to controller.
Copyright
©
2019 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS3602AP-00
September 2019
www.richtek.com
3