M16C/62P Group (M16C/62P, M16C/62PT)
2. Central Processing Unit (CPU)
2.8.8
Stack Pointer Select Flag (U Flag)
ISP is selected when the U flag is “0”; USP is selected when the U flag is “1”.
The U flag is cleared to “0” when a hardware interrupt request is accepted or an INT instruction for software
interrupt Nos. 0 to 31 is executed.
2.8.9
Processor Interrupt Priority Level (IPL)
IPL is configured with three bits, for specification of up to eight processor interrupt priority levels from level 0
to level 7.
If a requested interrupt has priority greater than IPL, the interrupt is enabled.
2.8.10 Reserved Area
When write to this bit, write “0”. When read, its content is indeterminate.
Rev.2.41 Jan 10, 2006 Page 32 of 96
REJ03B0001-0241
RENESAS [ RENESAS TECHNOLOGY CORP ]
