May 2007
rev 0.2
PCS5P23Z05B/09B
Timing-Safe™ Peak EMI reduction IC
General Features
eight-pin version and accepts one reference input and
drives out five low-skew clocks.
•
Clock distribution with Timing-Safe™ Peak EMI
Reduction
All parts have on-chip PLLs that lock to an input clock on
the CLKIN pin. The PLL feedback is on-chip and is
obtained from the CLKOUT pad, internal to the device.
•
•
•
Input frequency range: 20MHz - 50MHz
Zero input - output propagation delay
Low-skew outputs
• Output-output skew less than 250pS
• Device-device skew less than 700pS
Less than 200pS cycle-to-cycle jitter
Available in 16pin, 150mil SOIC, 4.4mm TSSOP
(PCS5P23Z09B), and in 8pin, 150 mil SOIC,
4.4mm TSSOP Packages (PCS5P23Z05B)
3.3V Operation
Industrial temperature range
Advanced CMOS technology
The First True Drop-in Solution
Multiple PCS5P23Z05B/09B devices can accept the same
input clock and distribute it. In this case, the skew between
the outputs of the two devices is guaranteed to be less than
700pS.
•
•
All outputs have less than 200pS of cycle-to-cycle jitter.
The input and output propagation delay is guaranteed to be
less than ±350pS, and the output-to-output skew is
guaranteed to be less than 250pS.
•
•
•
•
Refer “Spread Spectrum Control and Input-Output Skew
Functional Description
Table”
for deviations and Input-Output Skew for
PCS5P23Z05B and PCS5P23Z09B devices
PCS5P23Z05B/09B is a versatile, 3.3V zero-delay buffer
designed to distribute high-speed Timing-Safe™ clocks
with Peak EMI Reduction. PCS5P23Z09B accepts one
reference input and drives out nine low-skew clocks. It is
available in a 16pin Package. The PCS5P23Z05B is the
The PCS5P23Z05B and PCS5P23Z09B are available in
two different packages, as shown in the ordering
information table.
Block Diagram
PLL
CLKOUT
CLKA1
CLKA2
CLKA3
CLKA4
CLKB1
CLKB2
CLKB3
CLKB4
PLL
CLKOUT
MUX
CLKIN
CLKIN
CLK1
CLK2
CLK3
PCS5P23Z05B
CLK4
S2
S1
Select Input
Decoding
PCS5P23Z09B
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200 Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.