S/UNI-IMA-4 Telecom Standard Product Data Sheet
Released
Register 0x210: Group Timeout Register #2
Bit
15:4
3:0
Type
Function
Reserved
TX_active_timeout
Default
R/W
0x4
This register holds additional group time-out values.
TX_active_timeout
During the group start-up or LASR, this value determines how long the RIPP should wait
before it can move any TX LSM’s to Active state, unless all the links involved are being
reported RX = Active by the FE, and all NE RX link state machines are active (for
symmetric mode). In the case of group start-up, the timer is started when the GSM enters
Insufficient-links state; during LASR, it is started when the PM issues add_link command.
Proprietary and Confidential to PMC-Sierra, Inc., and for its customers’ internal use.
Document No.: PMC-2020889, Issue 2
184