S/UNI-IMA-4 Telecom Standard Product Data Sheet
Released
Register 0x212: TX Link Timeout Register
Bit
15:4
3:0
Type
R/W
R/W
Function
Reserved
TX_link_deleted_timeout
Default
0
0x4
This register holds the time-out values used at different states of the TX LSM. The actual time
represented by the timeout value in this register can be obtained as:
Real_time = Timeout_value * Internal_timer_tick_interval
Also, note that actual timeout period may be one less than the specified timeout interval, due to
the asynchronous nature of events with respect to the timer. For example, if the interval is 0.25
ns, and the timeout_value is specified as 4, then the timeout will occur after 0.75 ns to 1.00 ns in
that state. To guarantee a timeout of at least 1 second, a value of 0x5 would have to be written.
TX_link_deleted_timeout
During link deletion, this value determines how long the TX LSM should stay in the
DELETED state before it can move to the UNASSIGNED state (if the FE does not report
RX != Active). The set_rx_phy_defect command immediately terminates this timer
(causing an immediate transition to the UNASSIGNED state), as it is assumed that the FE
state is unknown.
Proprietary and Confidential to PMC-Sierra, Inc., and for its customers’ internal use.
Document No.: PMC-2020889, Issue 2
185