S/UNI-IMA-4 Telecom Standard Product Data Sheet
Released
WORD
BIT
DATA FIELD
DESCRIPTION
2
INVALID_ICP _INT
Invalid ICP parameters detected on RX link
during validation of the ICP cell parameters
causing validation to fail. Possible reasons
include:
Invalid LID (i.e., duplicate).
Invalid ICP cell offset (out of range).
Invalid RX IMA ID, which may indicate a
misconnectivity problem.
Invalid OAM label received after IMA version
being determined through negotiation.
Invalid Group symmetry received after
symmetry being determined through
negotiation.
This bit is reset immediately after read_event
command is executed for the group of which
this link is a member.
1
0
RX_TIMEOUT_INT
Indicates the LASR procedure timed out prior to
the link entering the ACTIVE state.
This bit is reset immediately after the
read_event command is executed for the group
of which this link is a member.
INVALID_FE_TX_INT
Invalid FE TX LSM states were detected in an
incoming non-errored ICP cell.
This bit is reset immediately after the
read_event command is executed for the group
of which this link is a member.
Proprietary and Confidential to PMC-Sierra, Inc., and for its customers’ internal use.
Document No.: PMC-2020889, Issue 2
180