S/UNI®-JET Data Sheet
Released
TXMFPI
The TXMFPI bit controls which of the inputs TMFPI or TFPI is valid. If TXMFPI is a logic
one, then TMFPI will be expected. If TXMFPI is a logic zero, then TFPI will be expected.
This bit is effective only if the FRMRONLY bit in the S/UNI-JET Configuration 1 Register
is a logic one.
STATSEL[2:0]
The STATSEL[2:0] bits are used to select the function of the FRMSTAT output. The selection
is shown in Table 7:
Table 7 STATSEL[2:0] Options
STATSEL[2:0]
FRMSTAT output pin indication function
000
E3/DS3 LOF or J2 extended LOF (integration periods are selected by the
LOFINT[1:0] register bits in the S/UNI-JET Receive Configuration Register)
001
010
011
100
101
110
111
PLCP LOF
E3/DS3 OOF or J2 LOF
PLCP OOF
AIS
LOS
DS3 Idle
Reserved
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-1990267, Issue 3
86