S/UNI®-JET Data Sheet
Released
4. RX_OEB will set RDAT[15:0], RPRTY, and RSOC to tri-state when set to logic one. When set to logic
zero, RDAT[15:0], RPRTY, and RSOC will be driven.
5. The DOENB signals will set the corresponding bidirectional signal (the one preceding the DOENB in the
boundary scan chain — see note 1 also) to an output when set to logic zero. When set to logic one, the
bidirectional signal will be tri-stated.
6. HIZ will set all outputs not controlled by TCA_OEB, RCA_OEB, RX_OEB, and DOENB to tri-state when
set to logic one. When set to logic zero, those outputs will be driven.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-1990267, Issue 3
258
PMC [ PMC-SIERRA, INC ]
