S/UNI®-JET Data Sheet
Released
COLSSI
The COLSSI bit is set to logic one when a PLCP change of link status signal code is detected.
The link status signal code is contained in the path status octet (G1). Link status signal codes
are required in systems implementing the IEEE-802.6 DQDB protocol. A change of link
status event occurs when two consecutive and identical link status codes are received that
differ from the current code. The COLSSI bit position is set to logic zero when this register is
read.
FEBEI
The FEBEI bit is set to logic one when a PLCP FEBE (FEBE) is detected. FEBE errors are
indicated in the PLCP path status octet (G1). The FEBEI bit position is set to logic zero when
this register is read.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-1990267, Issue 3
103