PM5362TUPP-PLUS
DATA SHEET
PMC-951010
ISSUE 6
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR / PERFORMANCE MONITOR
registers are required for normal operation, and test mode registers are used to
enhance the testability of the TUPP-PLUS. Tributary based normal mode
registers are arranged in order of transmission;TU #1 in TUG2 #1 of STS-1 #1 is
the first tributary transmitted, while TU #4 in TUG2 #7 of STS-1 #3 is the last.
The register set is accessed as follows:
8.8
Register Memory Map
Address
Register
00H
01H
02H
03H
04H
05H
06H
07H
08H
09H
0AH
0BH
0CH
0DH
0EH
0FH
10H
11H
12H
13H
14H-1FH
TUPP-PLUS Master Incoming Configuration
TUPP-PLUS Master Outgoing Configuration
Input Signal Activity Monitor, Accumulation Trigger
TUPP-PLUS Master Reset and Identity
VTPP #1 Configuration
VTPP #2 Configuration
VTPP #3 Configuration
Tributary Payload Processor and LOM Interrupt Enable
Tributary Payload Processor Interrupt and LOM Status
Parity Error and LOM Interrupt
RTOP and RTTB Interrupt Enable
RTOP and RTTB Interrupt Status
RTOP #1 Configuration
RTOP #2 Configuration
RTOP #3 Configuration
Reserved
Tributary Alarm AIS Control
Tributary Remote Defect Indication Control
Tributary Auxiliary Remote Defect Indication Control
Tributary Path Defect Indication Control
Reserved
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
58
PMC [ PMC-SIERRA, INC ]
