PixArt Imaging Inc.
PAS005B
CMOS Image Sensor IC
Bias current generated by external resistor enable
high
Reg_54[3]
extR_EnH
R/W
0
Reg_54[2]
Reg_54[1]
Reg_54[0]
bgp_EnH
ext2p5v_EnH
2p5vNdrv_EnH
R/W
R/W
R/W
0
0
0
Bandgap reference enable high
External 2.5V digital power enable high
X_VDDD with NMOS drive enable high
software power down:
Reg_55[0]
sfpd
R/W
0
Sensor core will be powered down if it is set to 1 but
I2C interface will be live.
software reset:
It is used to reset the full registers to default value.
The converge sign of color B when ABC is enable
Reg_56[0]
Reg_57[3]
Reg_57[2]
Reg_57[1]
soft_rst
R/W
R
0
0
0
0
Dac_B_sign_
ABC
Dac_G1_sign_
ABC
Dac_G0_sign_
ABC
Dac_R_sign_
ABC
The converge sign of color G1 when ABC is enable
The converge sign of color G0 when ABC is enable
The converge sign of color R when ABC is enable
R
R
Reg_57[0]
R
R
R
0
0
0
Reg_58[7:0]
Dac_B_ABC[7:0]
The converge value of color B when ABC is enabled
The converge value of color G1 when ABC is
enabled
The converge value of color G0 when ABC is
enabled
The converge value of color R when ABC is enabled
The converge value of color B when frame based
digital calibration is enabled.
The converge value of color B when frame based
digital calibration is enabled.
The converge value of color G1 when frame based
digital calibration is enabled.
The converge value of color G1 when frame based
digital calibration is enabled.
The converge value of color G0 when frame based
digital calibration is enabled.
The converge value of color G0 when frame based
digital calibration is enabled.
Reg_59[7:0] Dac_G1_ABC[7:0]
Reg_60[7:0] Dac_G0_ABC[7:0]
R
R
R
0
0
0
Reg_61[7:0]
Dac_R_ABC[7:0]
Reg_62[4:0] acc1_B_FrmAvg[12:8]
Reg_63[7:0] acc1_B_FrmAvg[7:0]
R
R
R
R
R
R
R
0
0
0
0
0
0
0
acc1_G1_FrmAvg[12:8
Reg_64[4:0]
]
Reg_65[7:0] acc1_G1_FrmAvg[7:0]
acc1_G0_FrmAvg[12:8
Reg_66[4:0]
]
Reg_67[7:0] acc1_G0_FrmAvg[7:0]
Reg_68[4:0] acc1_R_FrmAvg[12:8]
Reg_69[7:0] acc1_R_FrmAvg[7:0]
The converge value of color R when frame based
digital calibration is enabled.
The converge value of color R when frame based
digital calibration is enabled.
Part_ID[11:4]
R
0
Part_ID[3:0]
rrc
VerID
R
1
2
3
Np_i2c[3:0]
R/W
R/W
R/W
Np[5:0]
cf[1:0]
single_
path
cm
rrr
rf[1:0]
wcp_in[10:8]
4
5
R/W
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail: fae_service@pixart.com.tw