欢迎访问ic37.com |
会员登录 免费注册
发布采购

ADNS-3090 参数 Datasheet PDF下载

ADNS-3090图片预览
型号: ADNS-3090
PDF下载: 下载PDF文件 查看货源
内容描述: 高性能光学鼠标传感器 [High-Performance Optical Mouse Sensor]
分类和应用: 传感器光电二极管
文件页数/大小: 38 页 / 756 K
品牌: PIXART [ PIXART IMAGING INC. ]
 浏览型号ADNS-3090的Datasheet PDF文件第30页浏览型号ADNS-3090的Datasheet PDF文件第31页浏览型号ADNS-3090的Datasheet PDF文件第32页浏览型号ADNS-3090的Datasheet PDF文件第33页浏览型号ADNS-3090的Datasheet PDF文件第35页浏览型号ADNS-3090的Datasheet PDF文件第36页浏览型号ADNS-3090的Datasheet PDF文件第37页浏览型号ADNS-3090的Datasheet PDF文件第38页  
PixArt Imaging Inc.  
ADNS-3090 High-Performance Optical Mouse Sensor  
Frame_Period_Max_Bound_Lower  
Address: 0x19  
Access: Read/Write  
Reset Value: 0xE0  
Bit  
7
6
5
4
3
2
1
0
Field  
FBm  
FBm  
FBm  
FBm  
FBm  
FBm  
FBm  
FBm  
0
7
6
5
4
3
2
1
Frame_Period_Max_Bound_Upper  
Address: 0x1A  
Access: Read/Write  
Reset Value: 0x2E  
Bit  
7
6
5
4
3
2
1
0
Field  
FBm  
FBm  
FBm  
FBm  
FBm  
FBm  
FBm  
FBm  
8
15  
14  
13  
12  
11  
10  
9
Data Type: 16-bit unsigned integer.  
USAGE: This value sets the maximum frame period (the MINIMUM frame rate) which may be selected by the automatic  
frame rate control, or sets the actual frame period when operating in manual mode. Units are clock cycles. The formula  
is  
Frame Rate = Clock Frequency / Register value  
To read from the registers, read Upper first followed by Lower. To write to the registers, write Lower first, followed by  
Upper. To set the frame rate manually, disable automatic frame rate mode via the Extended_Config register and write  
the desired count value to these registers.  
Writing to the Frame_Period_Max_Bound_Upper and Lower registers also activates any new values in the following  
registers:  
• Frame_Period_Max_Bound_Upper and Lower  
• Frame_Period_Min_Bound_Upper and Lower  
• Shutter_Max_Bound_Upper and Lower  
Any data written to these registers will be saved but will not take effect until the write to the Frame_Period_Max_  
Bound_Upper and Lower is complete. After writing to this register, two complete frame times are required to  
implement the new settings. Writing to any of the above registers before the implementation is complete may put  
the chip into an undefined state requiring a reset. The “Busy” bit in the Extended_Config register may be used in lieu  
of a timer to determine when it is safe to write. See the Extended_Config register for more details.  
The following table lists some Frame_Period values for popular frame rates (clock rate = 24MHz).  
In addition, the three bound registers must also follow this rule when set to non-default values:  
Frame_Period_Max_Bound ≥ Frame_Period_Min_Bound + Shutter_Max_Bound.  
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.  
PixArt Imaging Inc.  
E-mail: fae_service@pixart.com.tw  
34  
 复制成功!