Philips Semiconductors
LPC2210/2220
16/32-bit ARM microcontrollers with external memory interface
Table 4:
Symbol
V
DDA(1V8)
Pin description
…continued
Pin (LQFP)
143
Pin (TFBGA) Type
A2
I
Description
Analog 1.8 V core power supply:
This is the power supply
voltage for internal circuitry. This should be nominally the
same voltage as V
DD(1V8)
but should be isolated to minimize
noise and error.
3.3 V pad power supply:
This is the power supply voltage for
the I/O ports.
V
DD(3V3)
I
2, 31, 39, 51, B1, K3, M3,
M6, N8, K10,
57, 77, 94,
104, 112, 119 F12, C13,
A11, B9
14
F3
I
V
DDA(3V3)
Analog 3.3 V pad power supply:
This should be nominally
the same voltage as V
DD(3V3)
but should be isolated to
minimize noise and error.
[1]
[2]
[3]
[4]
5 V tolerant pad providing digital I/O functions with TTL levels and hysteresis and 10 ns slew rate control.
5 V tolerant pad providing digital I/O functions with TTL levels and hysteresis and 10 ns slew rate control. If configured for an input
function, this pad utilizes built-in glitch filter that blocks pulses shorter than 3 ns.
Open drain 5 V tolerant digital I/O I
2
C-bus 400 kHz specification compatible pad. It requires external pull-up to provide an output
functionality.
5 V tolerant pad providing digital I/O (with TTL levels and hysteresis and 10 ns slew rate control) and analog input function. If configured
for a digital input function, this pad utilizes built-in glitch filter that blocks pulses shorter than 3 ns. When configured as an ADC input,
digital section of the pad is disabled.
5 V tolerant pad with built-in pull-up resistor providing digital I/O functions with TTL levels and hysteresis and 10 ns slew rate control.
The pull-up resistor’s value ranges from 60 kΩ to 300 kΩ.
5 V tolerant pad providing digital input (with TTL levels and hysteresis) function only.
Pad provides special analog functionality.
[5]
[6]
[7]
9397 750 14061
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02— 30 May 2005
13 of 49