ISP1581
Hi-Speed USB peripheral controller
Philips Semiconductors
Table 2:
Pin description for LQFP64 …continued
Symbol[1]
Pin
Type[2] Description
DATA4
46
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
-
bit 4 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
DATA5
47
48
49
50
51
52
53
54
55
56
57
58
bit 5 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
DATA6
bit 6 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
DATA7
bit 7 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
DATA8
bit 8 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
DATA9
bit 9 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
DATA10
DATA11
DATA12
DATA13
DATA14
DATA15
bit 10 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
bit 11 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
bit 12 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
bit 13 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
bit 14 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
bit 15 of bidirectional data.
bidirectional pad; push pull output; 5 ns slew rate control;
TTL; 5 V tolerant.
[3]
VCC(3.3)
supply voltage (3.3 V ± 0.3 V); supplies internal digital
circuits or it is the tapped out voltage from the internal
regulator; this regulated voltage cannot be used to drive
external devices; see Section 10
XTAL2
XTAL1
59
60
O
I
crystal oscillator output (12 MHz); connect a fundamental
parallel-resonant crystal; leave this pin open when using an
external clock source on pin XTAL1
crystal oscillator input (12 MHz); connect a fundamental
parallel-resonant crystal or an external clock source
(leaving pin XTAL2 unconnected)
9397 750 13462
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
Product data
Rev. 06 — 23 December 2004
9 of 79