5.2. Updating EEPROM Contents with POEB-x.x.bin
After the POEA-x.x.bin update is complete, the web/SNMP interface image POEB-x.x.bin needs to be
uploaded into the internal EEPROM. There are two methods to updating the POEB-x.x.bin.
Method One:
In the address bar of your internet browser, enter http://hostname/upload, where hostname is the
string corresponding to the Midspan IP address. Then use the Browse... button (see Fig.5.3 Upload in
Internet Explorer) to locate the file POEB-x.x.bin, then click the Upload button.
Figure 34: Upload in Internet Explorer
If the EEPROM is successfully updated, <Software Update Successful > will be displayed in a new
window. Click on Site main page to open the main controller.
Figure 35: Software Update Successful Window
Phihong USA Corporation • 47800 Fremont Blvd. Fremont, CA 94538 • Tel: 1.510.445.0100 Fax: 1.510.445.1678
www.phihong.com or www.midspans.com
-42-
PHIHONG [ PHIHONG USA INC. ]
