SURFACE MOUNT DEVICE LED
Part No. : L-C150TBZCT-AG
REV:B / 3
ꢀ Cleaning
ꢀ
ꢀ
ꢀ
If cleaning is required , use the following solutions for less than 1 minute and less than 40℃.
Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as
the oscillator output, size of PCB and LED mounting method. The use of ultrasonic
cleaning should be enforced at proper output after confirming there is no problem.
Appropriate chemicals: Ethyl alcohol and isopropyl alcohol.
ꢀ Suggest Soldering Pad Dimensions
Direction of PWB camber
and go to reflow furnace
DRAWING NO. : DS-71-07-0029
DATE : 2013-5-29
PAGE
10 of 17
PARA-FOR-068