BelaSigna 200
All Dimensions in Millimeters
Ao = 8.3 mm
Bo = 8.3 mm
Ko = 2.0 mm
K1 = 1.0 mm
Figure 5: QFN Tape Dimensions
Notes:
1. 10 sprocket hole pitch cumulative tolerance ± 0.02.
2. Camber not to exceed 1 mm in 100 mm.
3. Material: PS+C.2.
4. Ao and Bo measured on a plane 0.3 mm above the bottom of the pocket.
5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier.
6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole.
Figure 6: QFN Orientation in Tape
Rev. 16 | Page 10 of 43 | www.onsemi.com
ONSEMI [ ONSEMI ]
