WL/WLM
Item
Applicable models and Actuators
Details
Roller Levers:
Installing the Roller on the Inside
By installing the roller lever in the op-
posite direction, the roller can be in-
stalled on the inside. (Set so that
operation can be completed within a
180° level range.)
WLCA@, WL01CA@, WLH@, WL-
CA@-2, WL01CA@-2, WLMCA2@,
WLMH2@, WLMG2@, WLMGCA2@,
WLG@, except for the adjustable roller
levers.
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
Loosen the
Allen-head bolt.
WLCA32-41
WLCA32-43
Selecting the Roller Position
There are four types of fork lever lock
for use depending on the roller posi-
tion.
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
WLCA32-42
WLCA32-44
Note: An explanation of the operation of fork lever locks is provided after
this table.
WLCA12 etc.
Loosen this
Allen-head bolt
and adjust the
length of the rod.
Adjustment range radius:
25 to 89 mm
Adjusting the Length of the Rod or
Lever
The length of the rod or lever can be
adjusted by loosening the Allen-head
bolt.
Adjustable Roller Levers:
WLCA12, WL01CA12 etc.
Adjustable Rod Levers:
WLCL, WL01CL, etc.
Loosen this
Allen-head bolt
and adjust the
length of the
lever.
Operation of Fork Lever Locks
The fork lever lock is configured so that the dog pushes the lever to reverse the output and this reversed state is maintained even after
the dog continues on. If the dog then pushes the lever from the opposite direction, the lever will return to its original position.
Example
NC terminal: ON
NO terminal: ON
NO terminal: ON
42
OMRON [ OMRON ELECTRONICS LLC ]
