Series KP
Miniature Audio/Video Pushbuttons
ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS
Cap Orientation
ATTENTION
ELECTROSTATIC
SENSITIVE DEVICES
Notch
Tab
Step
As shown in the accompanying illustration, the cap and
plunger are designed with tabs and notches to assure proper
orientation of the cap on the switch.
Plunger
Notches
Removal of Cap Assembly & Separation of Lens & Diffuser
D
Holding the switch tightly, pull the cap off the switch. Once the
cap assembly is released from the plunger, the lens and diffuser can
be separated.
Pry up the lens with fingernail or flat tip screwdriver inserted at
the step on the diffuser.
Installation or Replacement of Cap
Cap
Assembly
Plunger
Switch
After aligning notches with tabs, join the lens and diffuser.
Hold the switch tightly without touching the terminals. Firmly
press the cap onto the plunger by applying pressure from one
side to the other until both are snapped together.
D44
www.nkk.com
NKK [ NIHON KAIHEIKI INDUSTRY CO. LTD. ]
