S Series Multifunction DAQ
Cables and Accessories
Recommended Configurations
I/O Configuration
Accessory
Cable
BNC shielded
BNC-2110 (777643-01)
TB-2705 (778241-01)
SCB-68 (776844-01)
CB-68LPR (777145-02)
SH68-68-EP (184749-01)
–
SH68-68-EP (184749-01)
R6868 (777643-01)
Front-mount shielded screw terminals (PXI only)
Noise-rejecting shielded screw terminals
Low-cost unshielded screw terminals
SH68-68-EP Noise-Rejecting Shielded Cable
SH68-68-EP Shielded Cable
The SH68-68-EP is a shielded 68-conductor cable terminated with two 68-pin female
0.050 series D-type connectors. It features individually shielded analog twisted pairs
for reduced cross-talk with high-speed devices.
1 m ....................................................................................................................184749-01
2 m ....................................................................................................................184749-02
R6868 Low-Cost Ribbon Cable
The R6868 is a 68-conductor flat ribbon cable terminated with two 68-pin female
0.050 series D-type connectors.
R6868 Ribbon Cable
1 m ....................................................................................................................182482-01
BNC-2110 Noise-Rejecting BNC I/O Connector Block
The BNC-2110 is a shielded connector block with signal-labeled BNC connectors for
easy connectivity of your analog input, digital I/O, and counter/timer signals.
BNC-2110 ........................................................................................................777643-01
Dimensions – 20.3 by 11.2 by 5.5 cm (8.0 by 4.4 by 2.2 in.)
TB-2705 Noise-Rejecting Front-Mount I/O Connector Block
BNC-2110 I/O Connector Block
The TB-2705 is a screw terminal block for your PXI DAQ devices. It latches to the
front of your PXI modules with locking screws and provides strain relief and easy access
to your analog, digital, trigger, and counter/timer signals through screw terminals.
TB-2705 ............................................................................................................778241-01
Dimensions – 8.43 by 10.41 by 2.03 cm (3.32 by 4.1 by 0.8 in.)
SCB-68 Noise-Rejecting Shielded I/O Connector Block
The SCB-68 is a shielded I/O connector block for rugged, very-low-noise signal
termination for connecting 68-pin DAQ devices. Silk-screened component locations
provide an easy addition of simple signal-conditioning circuitry for your analog input
channels. It also includes a general-purpose breadboard area as well as an IC
temperature sensor for cold-junction compensation in temperature measurements.
SCB-68 ..............................................................................................................776844-01
Dimensions – 19.5 by 15.2 by 4.5 cm (7.7 by 6.0 by 1.8 in.)
TB-2705 Terminal Block
CB-68LP and CB-68LPR Low-Cost I/O Connector Blocks
The CB-68 and CB-68LP are low-cost termination accessories with 68 screw
terminals for easy connector of field I/O signals to 68-pin DAQ devices. The
connector blocks include standoffs for use on a desktop or for mounting in a custom
panel. The CB-68LP has a vertical-mounted 68-pin connector. The CB-68LPR has a
right-angle mounted connector, and it is used with the CA-1000.
SCB-68 Shielded I/O Connector Block
CB-68LP............................................................................................................777145-01
Dimensions – 14.35 by 10.74 cm (5.65 by 4.23 in.)
CB-68LPR ........................................................................................................777145-02
Dimensions – 7.62 by 16.19 cm (3.00 by 6.36 in.)
CB-68LP and CB-68LPR I/O Connector Blocks
6
National Instruments • Tel: (800) 813 3693 • info@ni.com • ni.com
NI [ National Instruments ]
