74LVC74A-Q100
Nexperia
Dual D-type flip-flop with set and reset; positive-edge trigger
7. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
VCC
IIK
Parameter
Conditions
Min
0.5
50
0.5
-
Max
+6.5
-
Unit
V
supply voltage
input clamping current
input voltage
VI < 0 V
mA
V
[1]
[2]
VI
+6.5
50
VCC + 0.5
50
100
-
IOK
output clamping current
output voltage
VO > VCC or VO < 0 V
VO = 0 V to VCC
mA
V
VO
0.5
-
IO
output current
mA
mA
mA
C
ICC
supply current
-
IGND
Tstg
Ptot
ground current
100
65
-
storage temperature
total power dissipation
+150
500
[3]
Tamb = 40 C to +125 C
mW
[1] The minimum input voltage ratings may be exceeded if the input current ratings are observed.
[2] The output voltage ratings may be exceeded if the output current ratings are observed.
[3] For SO14 packages: above 70 C the value of Ptot derates linearly with 8 mW/K.
For TSSOP14 packages: above 60 C the value of Ptot derates linearly with 5.5 mW/K.
For DHVQFN14 packages: above 60 C the value of Ptot derates linearly with 4.5 mW/K.
8. Recommended operating conditions
Table 6.
Symbol
VCC
Recommended operating conditions
Parameter
Conditions
Min
1.65
1.2
0
Typ
Max
3.6
Unit
supply voltage
for maximum speed performance
for low-voltage applications
-
-
-
-
-
-
-
V
3.6
V
VI
input voltage
5.5
V
VO
output voltage
0
VCC
+125
20
V
Tamb
t/V
ambient temperature
40
0
C
ns/V
ns/V
input transition rise and VCC = 1.65 V to 2.7 V
fall rate
VCC = 2.7 V to 3.6 V
0
10
74LVC74A_Q100
All information provided in this document is subject to legal disclaimers.
©
Nexperia B.V. 2017. All rights reserved
Product data sheet
Rev. 2 — 5 April 2013
5 of 18
NEXPERIA [ Nexperia ]
