• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
!Note
C85E.pdf
Jul.13,2011
Safety Standard Certified Type KJ for Automotive Specifications and Test Methods
Type KJ Specifications and Test Methods
Continued from the preceding page.
No.
Item
Appearance
Specifications
Test Method
No marked defect
The capacitor should be subjected to 1000 temperature cycles.
Char.
B
E
Capacitance Change
Within ±10%
Step
Temperature (ºC)
-55+0/-3
Room temp.
125+3/-0
Time (min)
Capacitance
Change
1
2
3
4
30
3
30
3
Within ±20%
Temperature
Cycle
Room temp.
19
Char.
B, E
Specifications
D.F.V5.0%
D.F.
I.R.
Cycle time: 1000 cycles
Pre-treatment:
3000MΩ min.
Capacitor should be stored at 125±3˚C for 1 hr., then placed
at room condition* for 24±2 hrs.
Post-treatment:
Dielectric
Strength
Per Item 6
Capacitor should be stored for 24±2 hrs. at room condition.*
Capacitance
Change
Set the capacitor for 1000±12 hrs. at 150±3°C.
Within ±20%
High
Pre-treatment:
Temperature
Exposure
(Storage)
20
Capacitor should be stored at 125±3˚C for 1 hr., then placed
at room condition* for 24±2 hrs.
Post-treatment:
Char.
B, E
Specifications
D.F.V5.0%
D.F.
I.R.
1000MΩ min.
Capacitor should be stored for 24±2 hrs. at room condition.*
No marked defect except color change of outer
coating.
The capacitor should be subjected to 300 cycles.
Appearance
Step
1
2
Temperature (ºC)
-55+0/-3
Time (min)
Char.
B
E
Capacitance Change
Within ±10%
30
30
Capacitance
Change
125+3/-0
Thermal
Shock
Within ±20%
21
Pre-treatment:
Capacitor should be stored at 125±3˚C for 1 hr., then placed
at room condition* for 24±2 hrs.
Post-treatment:
Char.
B, E
Specifications
D.F.V5.0%
D.F.
Capacitor should be stored for 24±2 hrs. at room condition.*
I.R.
3000MΩ min.
Appearance
No marked defect
Per MIL-STD-202 Method 215
Char.
B
E
Capacitance Change
Within ±10%
Solvent 1: 1 part (by volume) of isopropyl alcohol
3 parts (by volume) of mineral spirits
Solvent 2: Terpene defluxer
Capacitance
Change
Within ±20%
Resistance to
Solvents
22
Solvent 3: 42 parts (by volume) of water
1 part (by volume) of propylene glycol
monomethyl ether
Char.
B, E
Specifications
D.F.V5.0%
D.F.
1 part (by volume) of monoethanolomine
I.R.
3000MΩ min.
Appearance
No marked defect
Apply the rated voltage and DC1.3+0.2/-0V (add 6.8kΩ resistor)
at 85±3°C and 80 to 85% humidity for 1000±12 hrs.
Char.
B
E
Capacitance Change
Within ±10%
Capacitance
Change
Within ±15%
Biased
Humidity
Pre-treatment:
23
Capacitor should be stored at 125±3°C for 1hr., then placed
at room condition* for 24±2 hrs.
Post-treatment:
Char.
B, E
Specifications
D.F.V5.0%
D.F.
I.R.
Capacitor should be stored for 24±2 hrs. at room condition.*
12
3000MΩ min.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
72
MURATA [ muRata ]
