TM
MP6400 -- LOW QUIESCENT CURRENT PROGRAMMABLE-DELAY SUPERVISORY CIRCUIT
Recommended Operating Conditions (3)
Supply Voltage VCC ............................1.8V to 6V
Operating Junct. Temp (TJ)..... –40°C to +125°C
ABSOLUTE MAXIMUM RATINGS (1)
Supply Voltage VCC .........................-0.3 to 6.5 V
CDELAY Voltage VCDELAY ....... –0.3V to VCC + 0.3V
Thermal Resistance (4)
θJA
θJC
SENSE Voltage VSENSE ....................–0.3V to 6V
All Other Pins..............................–0.3V to +6.5V
RESET Current IRESET ................................ 5mA
Continuous Power Dissipation (TA = +25°C) (2)
QFN6 (2mmx2mm) .................................... 2.5W
TSOT23-6................................................ 0.57W
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature.............. –65°C to +150°C
QFN6 (2mmx2mm) ................50 ...... 12...°C/W
TSOT23-6 ..............................220 .... 110..°C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ(MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-
TA)/θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7 4-layer board.
MP6400 Rev. 1.0
9/7/2012
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2012 MPS. All Rights Reserved.
3