MITSUBISHI MICROCOMPUTERS
3827 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
100P6S (100-PIN QFP) MARK SPECIFICATION FORM
Mitsubishi IC catalog name
Please choose one of the marking types below (A, B, C), and enter the Mitsubishi catalog name and the special mark (if needed).
A. Standard Mitsubishi Mark
80
51
81
50
Mitsubishi IC catalog name
Mitsubishi lot number
(6-digit or 7-digit)
100
31
1
30
B. Customer’s Parts Number + Mitsubishi catalog name
80
51
81
50
Customer’s Parts Number
Note : The fonts and size of characters are standard Mitsubishi type.
Mitsubishi IC catalog name
Note1 : The mark field should be written right aligned.
2 : The fonts and size of characters are standard Mitsubishi type.
3 : Customer’s Parts Number can be up to 14 characters : Only 0 ~
,
100
31
9, A ~ Z, +, –, /, (, ), &,
4 : If the Mitsubishi logo
, (periods), (commas) are usable.
.
1
30
is not required, check the box below.
Mitsubishi logo is not required
C. Special Mark Required
Note1 : If the Special Mark is to be Printed, indicate the desired
layout of the mark in the left figure. The layout will be
duplicated as close as possible.
80
51
81
50
Mitsubishi lot number (6-digit or 7-digit) and Mask ROM
number (3-digit) are always marked.
2 : If the customer’s trade mark logo must be used in the
Special Mark, check the box below.
Please submit a clean original of the logo.
For the new special character fonts a clean font original
(ideally logo drawing) must be submitted.
100
31
1
30
Special logo required
66
MITSUBISHI [ Mitsubishi Group ]
