DATA SHEET
VSP 94x2A
2
Table 3–8: I C bus command description, continued
Bit
Name
Description
Subaddress 81h
D7
ADLCK
[CP-CD]
Additional lock-detection
‘0’: no used
‘1’: used
D6
ADLCKSEL
[CP-CD]
Additional lock-detection selection
‘0’: PALID
‘1’: PALDET
D5
ADLCKCC
[CP-CD]
Additional lock-detection color-killer
‘0’: do not use lock signal
‘1’: use lock-signal
D4-D3
VFLYWHLMD[CP-
CD]
Vertical Flywheel Mode
‘00’: CHECK FOR CORRECT STANDARD
‘01’: 3 lines deviation allowed
‘10’: 4 lines deviation allowed, no check for interlace
‘11’: 5 lines deviation allowed, no check for interlace
D2-D0
SECACCL
[CP-CD]
Secam Acceptance level
‘000’: 100
‘001’: 84
‘010’: 64
‘011’: 32
‘100’: 70
‘101’: 76
‘110’: 90
Note: must be enabled by SECACC (7Fh) to have an effect
Micronas
Aug. 16, 2004; 6251-552-1DS
89
MICRONAS [ MICRONAS ]
