VSP 94x2A
DATA SHEET
2
Table 3–8: I C bus command description, continued
Bit
Name
Description
Subaddress 80h
D7
PORCNCL
[CP-CD]
Reset control bit cancel
‘0’: no operation
‘1’: reset POR bit (8Ch)
after use, PORCNCL must be set to ‘0’ again
D6-D4
NTCHSEL
[CP-CD]
Luminance Notch selection
‘000’: sharp notch
‘001’: medium 1
‘010’: medium 2
‘011’: broad notch
‘100’: broad steep notch (PAL, SECAM only)
D3
D2
D1
D0
CPLLRES
[CP-CD]
Force Chroma PLL reset
‘0’: no reset
‘1’: reset chroma PLL
after use, CPLLRES must be set to ‘0’ again
DISALLRES
[CP-CD]
Disable all chroma resets
‘0’: resets allowed
‘1’: resets disabled
may only be used if ONE color standard is selected
TRAPBLU
[CP-CD]
Notchfrequency for 4,250 MHz
‘0’: 4.25 MHz
‘1’: 4.2 MHz
Note: has only effect in SECAM mode
TRAPRED
[CP-CD]
Notchfrequency for 4,406 MHz
‘0’: 4.06 MHz
‘1’: 4.356 MHz
Note: has only effect in SECAM mode
88
Aug. 16, 2004; 6251-552-1DS
Micronas
MICRONAS [ MICRONAS ]
