MSP 34x0G
DATA SHEET
Multistandard Sound Processor Family
Current ICs have to perform adjustment procedures in
order to achieve good stereo separation for BTSC and
EIA-J. The MSP 34x0G has optimum stereo perfor-
mance without any adjustments.
Release Note: Revision bars indicate significant
changes to the previous edition. The hardware and
software description in this document is valid for
the MSP 34x0G version C12 and following ver-
sions.
All MSP 34xxG versions are pin compatible to the
MSP 34xxD. Only minor modifications are necessary
to adapt a MSP 34xxD controlling software to the
MSP 34xxG. The MSP 34x0G further simplifies con-
trolling software. Standard selection requires a single
I2C transmission only.
1. Introduction
The MSP 34x0G family of single-chip Multistandard
Sound Processors covers the sound processing of all
analog TV-Standards worldwide, as well as the NICAM
digital sound standards. The full TV sound processing,
starting with analog sound IF signal-in, down to pro-
cessed analog AF-out, is performed on a single chip.
Figure 1–1 shows a simplified functional block diagram
of the MSP 34x0G.
The MSP 34x0G has built-in automatic functions: The
IC is able to detect the actual sound standard automat-
ically (Automatic Standard Detection). Furthermore,
pilot levels and identification signals can be evaluated
internally with subsequent switching between mono/
stereo/bilingual; no I2C interaction is necessary (Auto-
matic Sound Selection).
These TV sound processing ICs now include versions
for processing the multichannel television sound
(MTS) signal conforming to the standard recom-
mended by the Broadcast Television Systems Com-
mittee (BTSC). The DBX noise reduction, or alterna-
tively, Micronas Noise Reduction (MNR) is performed
alignment free.
The MSP 34x0G can handle very high FM deviations
even in conjunction with NICAM processing. This is
especially important for the introduction of NICAM in
China.
The ICs are produced in submicron CMOS technology.
The MSP 34x0G is available in the following pack-
ages: PSDIP64-1, PSDIP52-1/-2, PMQFP80-11, and
PMQFP64-2.
Other processed standards are the Japanese FM-FM
multiplex standard (EIA-J) and the FM Stereo Radio
standard.
Loud-
speaker
Loud-
speaker
Sound
Sound IF1
De-
modulator
Pre-
processing
ADC
DAC
DAC
Sound IF2
Subwoofer
Processing
Headphone
Sound
Processing
Headphone
2
I S1
Prescale
Prescale
2
I S2
2
I S
SCART1
SCART2
SCART3
DAC
DAC
SCART
DSP
Input
SCART1
SCART2
ADC
SCART
Output
Select
Select
SCART4
MONO
Fig. 1–1: Simplified functional block diagram of the MSP 34x0G
6
May 27, 2003; 6251-476-1DS
Micronas