MAS 35x9F
DATA SHEET
Table 3–9: D0 control memory cells, continued
Memory
Address
(hex)
Function
Name
D0:34f
Interface Status Control (reset = 25
)
G.729
g729_InterfaceCont
rol
hex
This control cell is used to enable/disable interfaces in G.729 mode.
bit[6],[4]
bit [5]
reserved, must be set to zero
reserved, must be set to one
bit[3]
Enable/disable serial data output SDO
0 (reset)
1
SDO valid data
SDO invalid data
bit[2]
Output clock characteristic (SDO and S/PDIF outputs)
0
low impedance
high impedance
1 (reset)
bit[1]
bit[0]
reserved, must be set to zero
1)
Enable/Disable SDI
0
enable
disable
1 (reset)
D0:352
D0:353
D0:354
D0:355
D0:356
Volume input control: left gain
Volume input control: right gain
(reset=80000
)
G.729
G.729
All
in_L
hex
(reset=0
)
in_R
hex
Volume output control: left → left gain (reset=80000
)
out_LL
out_LR
out_RL
out_RR
hex
Volume output control: left → right gain (reset=0
)
All
hex
Volume output control: right → left gain(reset=0
)
All
hex
D0:357
Volume control: right → right gain (reset=80000
)
All
hex
1)
Note: The pins SIC, SII, SID are switched to output mode, if bit [0] = 1 (Reset value).
38
June 30, 2004; 6251-505-1DS
Micronas
MICRONAS [ MICRONAS ]
