256Mb, 3V Multiple I/O Serial Flash Memory
Revision History
Rev. C – 9/15
Rev. B – 6/15
• Revised wrap table
• Revised supported clock frequencies DTR
• Change bit 3 setting of Enhanced Volatile Configuration Register from 0 to 1
• Revised AC table
• Added reference to serial flash discovery parameter data, which is now contained in a
technical note
• Change DTR frequency at 80Mhz
• Revised cover page part number to: MT25QL256ABA.
• Revised signal assignments
• Revised supported clock frequencies with a note to reference TN-25-07: Tuning Data
Pattern for MT25Q and MT25T Devices
• Revised serial flash discovery parameter with a note to reference TN-25-06: SFDP for
MT25Q Family
• Increase ICC4 ,ICC5 and ICC6 at 35mA
• Added 80MHz information for ICC3 in DC specifications
Rev. A – 06/14
• Initial release
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-4000
www.micron.com/products/support Sales inquiries: 800-932-4992
Micron and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners.
This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein.
Although considered final, these specifications are subject to change, as further product development and data characterization some-
times occur.
CCMTD-1725822587-3368
mt25q-qljs-L256-ABA-xxT.pdf - Rev. K 07/18 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2014 Micron Technology, Inc. All rights reserved.
97
MICRON [ MICRON TECHNOLOGY ]
