256Mb, 3V Multiple I/O Serial Flash Memory
QUAD PROTOCOL Operations
QUAD PROTOCOL Operations
ENTER or RESET QUAD INPUT/OUTPUT MODE Command
To initiate these commands, the WRITE ENABLE command must not be executed. S#
must be driven LOW, and the command must be input on DQn.
Table 35: ENTER and RESET QUAD PROTOCOL Operations
Operation Name
Description/Conditions
ENTER QUAD INPUT/OUTPUT MODE (35h)
RESET QUAD INPUT/OUTPUT MODE (F5h)
The effect of the command is immediate.
CCMTD-1725822587-3368
mt25q-qljs-L256-ABA-xxT.pdf - Rev. K 07/18 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2014 Micron Technology, Inc. All rights reserved.
75
MICRON [ MICRON TECHNOLOGY ]
