PIC18F2480/2580/4480/4580
REGISTER 3-2:
OSCCON: OSCILLATOR CONTROL REGISTER
R/W-0
IDLEN
bit 7
R/W-1
IRCF2
R/W-0
IRCF1
R/W-0
IRCF0
R(1)
R-0
R/W-0
SCS1
R/W-0
SCS0
OSTS
IOFS
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
bit 7
IDLEN: Idle Enable bit
1= Device enters Idle mode on SLEEPinstruction
0= Device enters Sleep mode on SLEEPinstruction
bit 6-4
IRCF<2:0>: Internal Oscillator Frequency Select bits
111= 8 MHz (INTOSC drives clock directly)
110= 4 MHz
101= 2 MHz
100= 1 MHz(3)
011= 500 kHz
010= 250 kHz
001= 125 kHz
000= 31 kHz (from either INTOSC/256 or INTRC directly)(2)
bit 3
OSTS: Oscillator Start-up Timer Time-out Status bit(1)
1= Oscillator Start-up Timer time-out has expired; primary oscillator is running
0= Oscillator Start-up Timer time-out is running; primary oscillator is not ready
bit 2
IOFS: INTOSC Frequency Stable bit
1= INTOSC frequency is stable and the frequency is provided by one of the RC modes
0= INTOSC frequency is not stable
bit 1-0
SCS<1:0>: System Clock Select bits
1x= Internal oscillator block
01= Timer1 oscillator
00= Primary oscillator
Note 1: Depends on state of the IESO Configuration bit.
2: Source selected by the INTSRC bit (OSCTUNE<7>), see text.
3: Default output frequency of INTOSC on Reset.
DS39637D-page 36
© 2009 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
