欢迎访问ic37.com |
会员登录 免费注册
发布采购

PIC18F4580-I/PT 参数 Datasheet PDF下载

PIC18F4580-I/PT图片预览
型号: PIC18F4580-I/PT
PDF下载: 下载PDF文件 查看货源
内容描述: 28 /40/ 44引脚增强型闪存微控制器与ECAN技术, 10位A / D和纳瓦技术 [28/40/44-Pin Enhanced Flash Microcontrollers with ECAN Technology, 10-Bit A/D and nanoWatt Technology]
分类和应用: 闪存微控制器和处理器外围集成电路时钟
文件页数/大小: 490 页 / 8912 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号PIC18F4580-I/PT的Datasheet PDF文件第183页浏览型号PIC18F4580-I/PT的Datasheet PDF文件第184页浏览型号PIC18F4580-I/PT的Datasheet PDF文件第185页浏览型号PIC18F4580-I/PT的Datasheet PDF文件第186页浏览型号PIC18F4580-I/PT的Datasheet PDF文件第188页浏览型号PIC18F4580-I/PT的Datasheet PDF文件第189页浏览型号PIC18F4580-I/PT的Datasheet PDF文件第190页浏览型号PIC18F4580-I/PT的Datasheet PDF文件第191页  
PIC18F2480/2580/4480/4580  
REGISTER 17-2: ECCP1DEL: ECCP PWM DEAD-BAND DELAY REGISTER  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
PDC6(1)  
PDC5(1)  
PDC4(1)  
PDC3(1)  
PDC2(1)  
PDC1(1)  
PDC0(1)  
PRSEN  
bit 7  
bit 0  
Legend:  
R = Readable bit  
-n = Value at POR  
W = Writable bit  
‘1’ = Bit is set  
U = Unimplemented bit, read as ‘0’  
‘0’ = Bit is cleared x = Bit is unknown  
bit 7  
PRSEN: PWM Restart Enable bit  
1= Upon auto-shutdown, the ECCPASE bit clears automatically once the shutdown event goes away;  
the PWM restarts automatically  
0= Upon auto-shutdown, ECCPASE must be cleared in software to restart the PWM  
bit 6-0  
PDC<6:0>: PWM Delay Count bits(1)  
Delay time, in number of FOSC/4 (4 * TOSC) cycles, between the scheduled and actual time for a PWM  
signal to transition to active.  
Note 1: Reserved on PIC18F2X80 devices; maintain these bits clear.  
REGISTER 17-3: ECCP1AS: ECCP AUTO-SHUTDOWN CONTROL REGISTER(1)  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
R/W-0  
ECCPASE  
ECCPAS2  
ECCPAS1  
ECCPAS0  
PSSAC1  
PSSAC0  
PSSBD1(1)  
PSSBD0(1)  
bit 7  
bit 0  
Legend:  
R = Readable bit  
W = Writable bit  
‘1’ = Bit is set  
U = Unimplemented bit, read as ‘0’  
‘0’ = Bit is cleared x = Bit is unknown  
-n = Value at POR  
bit 7  
ECCPASE: ECCP Auto-Shutdown Event Status bit  
1= A shutdown event has occurred; ECCP outputs are in shutdown state  
0= ECCP outputs are operating  
bit 6-4  
ECCPAS<2:0>: ECCP Auto-Shutdown Source Select bits  
111= RB0 or Comparator 1 or Comparator 2  
110= RB0 or Comparator 2  
101= RB0 or Comparator 1  
100= RB0  
011= Either Comparator 1 or 2  
010= Comparator 2 output  
001= Comparator 1 output  
000= Auto-shutdown is disabled  
bit 3-2  
bit 1-0  
PSSAC<1:0>: Pins, A and C, Shutdown State Control bits  
1x= Pins, A and C, tri-state (PIC18F4X80 devices)  
01= Drive Pins, A and C, to ‘1’  
00= Drive Pins, A and C, to ‘0’  
PSSBD<1:0>: Pins, B and D, Shutdown State Control bits(1)  
1x= Pins, B and D, tri-state  
01= Drive Pins, B and D, to ‘1’  
00= Drive Pins, B and D, to ‘0’  
Note 1: Reserved on PIC18F2X80 devices; maintain these bits clear.  
© 2009 Microchip Technology Inc.  
DS39637D-page 187  
 复制成功!