PIC18F45J10 FAMILY
24.2 DC Characteristics: Power-Down and Supply Current
PIC18F24J10/25J10/44J10/45J10 (Industrial)
PIC18LF24J10/25J10/44J10/45J10 (Industrial) (Continued)
PIC18F45J10 Family
Standard Operating Conditions (unless otherwise stated)
(Industrial)
Operating temperature
-40°C ≤ TA ≤ +85°C for industrial
Param
No.
Device
Supply Current (IDD)
Typ Max Units
Conditions
(2)
All devices 150
337
355
512
518
528
647
737
787
917
954
μA
μA
μA
μA
μA
μA
μA
μA
μA
μA
mA
mA
mA
mA
mA
mA
mA
mA
-40°C
160
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
VDD = 2.5V
VDD = 3.3V
VDD = 2.5V
VDD = 3.3V
VDD = 2.5V
VDD = 3.3V
FOSC = 1 MHz
(PRI_IDLE mode,
EC oscillator)
220
All devices 190
200
250
All devices 350
375
FOSC = 4 MHz
(PRI_IDLE mode,
EC oscillator)
420
All devices 410
0.450 1.03
0.475 1.13
All devices 5.0
10.1
10.6
11.1
11.1
12.1
13.1
5.2
FOSC = 40 MHz
(PRI_IDLE mode,
EC oscillator)
5.5
All devices 5.5
6.0
6.5
Note 1: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta
current disabled (such as WDT, Timer1 oscillator, etc.).
2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
3: Standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to +70°C. Extended temperature
crystals are available at a much higher cost.
DS39682E-page 310
© 2009 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
