PIC18F45J10 FAMILY
24.2 DC Characteristics: Power-Down and Supply Current
PIC18F24J10/25J10/44J10/45J10 (Industrial)
PIC18LF24J10/25J10/44J10/45J10 (Industrial)
PIC18F45J10 Family
Standard Operating Conditions (unless otherwise stated)
(Industrial)
Operating temperature
-40°C ≤ TA ≤ +85°C for industrial
Param
No.
Device
Power-Down Current (IPD)
Typ
Max Units
Conditions
(1)
All devices
19
25
40
20
25
45
104
104
184
203
203
289
μA
μA
μA
μA
μA
μA
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
VDD = 2.5V
(Sleep mode)
All devices
VDD = 3.3V
(Sleep mode)
Note 1: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta
current disabled (such as WDT, Timer1 oscillator, etc.).
2: The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
3: Standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to +70°C. Extended temperature
crystals are available at a much higher cost.
DS39682E-page 306
© 2009 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
