PIC18F45J10 FAMILY
24.3 DC Characteristics: PIC18F45J10 Family (Industrial) (Continued)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
DC CHARACTERISTICS
Param
Symbol
No.
Characteristic
Min
Max
Units
Conditions
VOL
Output Low Voltage
D080
I/O Ports (PORTB, PORTC)
—
—
—
0.4
0.4
0.4
V
V
V
IOL = 8.5 mA, VDD 3.3V
-40°C to +85°C
I/O Ports (PORTA, PORTD,
PORTE)
IOL = 3.4 mA, VDD 3.3V
-40°C to +85°C
D083
D090
OSC2/CLKO
(EC mode)
Output High Voltage(3)
IOL = 1.6 mA, VDD 3.3V
-40°C to +85°C
VOH
I/O Ports (PORTB, PORTC)
2.4
2.4
2.4
—
—
—
V
V
V
IOH = -6 mA, VDD 3.3V
-40°C to +85°C
I/O Ports (PORTA, PORTD,
PORTE)
IOH = -2 mA, VDD 3.3V
-40°C to +85°C
D092
OSC2/CLKO
(EC mode)
IOH = 1.0 mA, VDD 3.3V
-40°C to +85°C
Capacitive Loading Specs
on Output Pins
D100(4) COSC2 OSC2 Pin
—
15
pF In HS mode when
external clock is used to drive
OSC1
D101
D102
CIO
CB
All I/O Pins
—
—
50
pF To meet the AC Timing
Specifications
pF I2C™ Specification
SCLx, SDAx
400
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Refer to Table 10-2 for the pins that have corresponding tolerance limits.
DS39682E-page 314
© 2009 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
