PIC16F688
EXAMPLE 4-3:
INITIALIZING PORTC
4.3
PORTC
BANKSELPORTC
;
PORTC is a general purpose I/O port consisting of 6
bidirectional pins. The pins can be configured for either
digital I/O or analog input to A/D converter or compara-
tor. For specific information about individual functions
such as the EUSART or the A/D converter, refer to the
appropriate section in this data sheet.
CLRF
MOVLW
MOVWF
PORTC
07h
CMCON0
;Init PORTC
;Set RC<4,1:0> to
;digital I/O
;
;digital I/O
;Set RC<3:2> as inputs
;and set RC<5:4,1:0>
;as outputs
BANKSELANSEL
CLRF
MOVLW
MOVWF
ANSEL
0Ch
TRISC
Note:
The ANSEL and CMCON0 registers must
be initialized to configure an analog
channel as a digital input. Pins configured
as analog inputs will read ‘0’.
REGISTER 4-6:
PORTC: PORTC REGISTER
U-0
—
U-0
—
R/W-x
RC5
R/W-x
RC4
R/W-0
RC3
R/W-0
RC2
R/W-0
RC1
R/W-0
RC0
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
bit 7-6
bit 5-0
Unimplemented: Read as ‘0’
RC<5:0>: PORTC I/O Pin bit
1= PORTC pin is > VIH
0= PORTC pin is < VIL
REGISTER 4-7:
TRISC: PORTC TRI-STATE REGISTER
U-0
—
U-0
—
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
R/W-1
TRISC5
TRISC4
TRISC3
TRISC2
TRISC1
TRISC0
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
bit 7-6
bit 5-0
Unimplemented: Read as ‘0’
TRISC<5:0>: PORTC Tri-State Control bits
1= PORTC pin configured as an input (tri-stated)
0= PORTC pin configured as an output
DS41203C-page 42
© 2007 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
