PIC12F508/509/16F505
TABLE 10-4: CALIBRATED INTERNAL RC FREQUENCIES – PIC12F508/509/16F505
Standard Operating Conditions (unless otherwise specified)
Operating Temperature -40°C ≤ TA ≤ +85°C (industrial),
-40°C ≤ TA ≤ +125°C (extended)
AC CHARACTERISTICS
Operating Voltage VDD range is described in
Section 10.1 "DC Characteristics"
Param
Freq
Tolerance
Sym
Characteristic
Min Typ†
Max Units
Conditions
No.
F10
FOSC
Internal Calibrated
1%
3.96 4.00
4.04 MHz VDD and Temperature
TBD
INTOSC Frequency(1)
2%
5%
3.92 4.00
3.80 4.00
4.08 MHz 2.5V ≤ VDD ≤ 5.5V
0°C ≤ TA ≤ +85°C
4.20 MHz 2.0V ≤ VDD ≤ 5.5V
-40°C ≤ TA ≤ +85°C (Ind.)
-40°C ≤ TA ≤ +125°C (Ext.)
Legend: TBD = To Be Determined.
*
These parameters are characterized but not tested.
†
Data in the Typical (“Typ”) column is at 5V, 25°C unless otherwise stated. These parameters are for
design guidance only and are not tested.
Note 1: To ensure these oscillator frequency tolerances, VDD and VSS must be capacitively decoupled as close to
the device as possible. 0.1 uF and 0.01 uF values in parallel are recommended.
FIGURE 10-5:
I/O TIMING – PIC12F508/509/16F505
Q1
Q4
Q2
Q3
OSC1
I/O Pin
(input)
17
18
19
I/O Pin
(output)
New Value
Old Value
20, 21
Note:
All tests must be done with specified capacitive loads (see data sheet) 50 pF on I/O pins and CLKOUT.
© 2007 Microchip Technology Inc.
Preliminary
DS41236C-page 75
MICROCHIP [ MICROCHIP ]
